Product Development: Rescale existing turbomachine design vs full design process

When deciding on a new product line, manufacturers of turbomachines and their engineering teams must often decide whether to rescale a product that they already manufacture or to begin a full design process for a completely new machine. For example, a producer of 5 MW axial turbines wants to start manufacturing 10 MW turbines, does it make sense to create a brand new design from scratch or to simply scale up the 5 MW turbine they already produce to a similar 10 MW version? To answer this question, many considerations have to be taken into account, the general answer however is, that it is almost always a better idea to start a new design.

Improved Design Technology

Many manufacturers wrongly believe that by simply scaling their current product that they will save not only on design costs, but that they can leverage their existing manufacturing capabilities to stamp out a similar product. What is not factored in however is the progress of design technology and theory since their original machine was first conceptualized. The result from a simple scaling process will simply be a less optimized and efficient machine for any use as compared to a new configuration using the latest in design software. Increasing software sophistication and computing power are constantly pushing the boundaries of efficiency while minimizing operating costs. Simply put, your competitors will have designed a superior product compared to yours.

BladeProfiling-Turbomachinery-Design-Software

        AxSTREAM 3D Blade Design Software

Improved Materials

When was your current machine designed? Many older machines were created using materials that by today’s standards are simply not capable of operating at the extreme conditions  (mostly temperatures) required today to attain the energy efficiency requirements set up by ever increasing regulations. Depending on materials used, the optimal blading structure, bearings, etc. geometries would be significantly unique. If one were to simply scale up their current product, they would either be using old materials or have inefficiently designed machine components for a different material. In either case, their scaled machine will be inferior to a configuration that was conceptualized and optimized from scratch.

Scaling Factors

Another very significant aspect of machine resizing is that it is not a straight forward process; if you want to double your power generation in a turbine for example you are not going to be doubling the blade size or mean diameter, for example, even when considering the same boundary conditions (inlet pressure and temperature, as well as, outlet pressure, rotation speed, and so on). For each specific set of conditions, fluid, rotation speed, mass flow rate, etc. a unique flow occurs inside the different blades. Changing one parameter will lead to changes in the flow and therefore result in inefficiencies, as it is what happens in off-design conditions (the machine is not operating at its maximum performance). This is why flow similarity parameters become relevant.

Machine Purpose and Type

One of the obvious questions to ask is, what is the purpose of my new machine and how much larger (or smaller) will I need it to be? If the new machine is intended for use with a completely different fluid, a new design will be optimal as different fluids interact in unique ways with varied rotor and stator configurations.

The machine type that you are considering is also critical to the decision. Different turbomachines do not scale in similar fashion with increase in size. For instance, radial turbines are usually not as efficient as axial turbines when one starts to approach the 2 MW range. In this instance the ideal solution is for a complete redesign since a smaller scale version that the manufacturer may have had would not be configured to operate at higher power ranges efficiently.

 

Turbocharger Design and Industry Usage Discussion

An opportunity to discuss turbocharger usage and design with Softinway engineer Ursula Shannon in a question and answer format:

What are some of the major current turbocharger design challenges?

When it comes to turbocharger design, there are two challenges that engineers generally face. “Turbo lag” and turbo boost power at varying engine RPMs. “Turbo lag” is the time that it takes for the engine to produce enough exhaust to start the turbocharger “working”. This can vary greatly depending on engine size, turbocharger geometry, exhaust output etc. Ideally, engineers want to reduce this “Turbo lag” by as much as possible in any given situation, as during that time, the exhaust is “wasted” in a sense. Finding the most efficient configuration with all of the parameters in mind can be a very challenging scenario from a design perspective.

The turbo boost design challenge is one of efficiency at variable exhaust outputs. A smaller charger for example will start to boost at lower engine speeds while a larger one will start to boost at engine speeds. The trade off however is that a smaller turbo will start to create what is known as back pressure at higher speeds, and this results in a loss of potential power. A larger turbocharger, will be able to create more overall boost at higher speeds, however the “Turbo Lag” is more pronounced as more engine exhaust is required. Minimizing these trade offs is another key challenge in turbocharger design.

Finally, the process of turbocharger design process itself is complex, and requires highly specialized software such as our own here in Softinway (AxSTREAM).

Turbocharger blog 3

AxSTREAM Turbocharger Design Software ( Flowpath Design and Optimization )

turbocharger blog 2

AxSTREAM Turbocharger Design Software (Compressor 1D Design and Analysis)

What are some design changes do you see coming to turbochargers in the future?

As I mentioned some of the challenges engineers face in turbocharger design, currently many technologies and methods are being developed to alleviate some of the issues faced.

Two stage turbochargers are good example of trying to offer a solution to the boost powers at varying engine outputs, using a smaller turbocharger that operates at low RPMs and a larger turbocharger that operates at higher RPMs.

Electronic energy storage setups are currently being developed and used in European race cars which uses the output side of the turbocharger as a sort of generator which stores energy in a battery from turbocharger operations and acts as a boost during a turbocharger’s lag period.

Continue reading “Turbocharger Design and Industry Usage Discussion”

Page 1 of 11