Applications of Centrifugal Pumps

Centrifugal Pumps are the most popular and commonly used type of pump for the transfer of any type of fluid. The volumetric flow rate range of centrifugal pumps can vary from several tens of ml/hour to  one hundred thousand m3/hour , while the pressure can be normal pressure to nearly 20MPa; and the liquid temperature can be as low as -200℃ or as high as 800℃. The fluid being transferred can be water (clean or sewage), oil, acid or alkali, suspension or liquid metal, etc. Therefore, centrifugal pumps are used across numerous industries:

  1. In the oil and gas or chemical industries, converting crude oil to products requires a complex process. Pumps play an important role in transferring these liquids, providing the required pressure and flow rate for chemical reactions. Sometimes, pumps are used to adjust temperature in certain parts of the system.
  2. In agriculture, centrifugal pumps are used in the majority of irrigation machinery. Agriculture pumps make up half of the total amount of centrifugal pumps being used today.
  3. In mining and metallurgy industries, centrifugal pumps are the most widely used equipment, for draining, and cooling of water supplies, etc.
  4. For power generation, the nuclear power plants need large amounts of primary, and secondary system pumps, while the thermal power plants also need boiler feed pumps, condensate pumps, loop pumps and as well as ash pumps.
  5. In military applications, the adjusting of airplane wings and rudders, turning of turret on ships and tanks, the up and down of submarines, all rely on pumps for hydraulic fluids.
  6. In shipbuilding, there are more than 100 different types of pumps in one typical ocean ship.
  7. Other applications include municipal water supplies and drainage; water supplies of locomotives; lubricating and cooling of machining equipment; bleach and dye transfer of textile industry; and milk and beverage pumping and sugar refining in the food industry.

 

Centrifugal pumps can be classified based on the number of impellers in the pump:

A single-stage pump, with only one impeller, is commonly used for high flow and low to moderate total dynamic head, as in Figure 1.

Single Stage Centrifugal Pump
Figure 1. Single Stage Centrifugal Pump

A multi-stage pump has two or more impellers working in a series to achieve higher total dynamic head.

All of these different applications and scenarios ask for different pumps, which means pump suppliers need to preform many designs for their clients.  The majority of these pumps can be designed quickly with AxSTREAM Hydro™, an integrated turbomachinery design software. Whether it is a new design starting from scratch, or the design analysis and optimization of an existing pump, AxSTREAM® can handle the complete flow path design, map generation (Figure 2.), blade profiling, CFD and stress analysis, rotor dynamics and bearing design.

Performance Map of a Centrifugal Pump
Figure 2. Performance Map of a Centrifugal Pump

References:

https://www.powerzone.com/centrifugal-pumps-working-applications-types-power-zone

Leave a Reply