New Release: AxCYCLE v. 4.0

We have just released the newest version of AxCYCLE, our software tool for thermodynamic cycle design and analysis. AxCYCLE 4.0 has some brand new features that will inevitably aid you in designing optimal Gas, Steam, Combined, Turbocharger, Supercritical CO2, Organic Rankine, and Waste Heat Recovery Cycles.

Take a look at the latest updates and additions:

Turbine Efficiency Calculation
In previous versions of AxCYCLE, efficiency was an input parameter that needed to be changed manually for each off-design condition. The Calculated Efficiency option will automatically recalculate the efficiency for off-design conditions.

blog - axcycle 4.0

New Components
Several new components were added to the AxCYCLE library for more sophisticated and customizable cycles.

Bearing: Used to simulate mechanical energy losses in bearings. The estimated mechanical losses are assigned as a power value and are accounted for in the total energy balance

Gearbox: Used to simulate the mechanical energy transfer between two shafts considering mechanical energy losses in the gearbox. These losses are measured using a gearbox efficiency value.

End Seal: Used to simulate seal leakage. The value of the leakage depends on the difference between the upstream and downstream pressure.

Steam Cycle Builder
AxCYCLE’s new wizard for the creation of basic steam cycles. It can be used for steam cycles with regenerative heating, optional moisture separators, and re-heaters. The Builder creates a cycle diagram with the correct fixed conditions and initial values, meaning the generated cycle is ready for calculation! It does all of the work for you!

Learn more about AxSTREAM and AxCYCLE on our website, or email us at info@softinway.com to find out exactly how we can help with your next turbomachinery project.

Leave a Reply

Your email address will not be published. Required fields are marked *