Supercritical CO2 operating in a closed-loop recompression Brayton cycle has the potential of equivalent or higher cycle efficiency versus supercritical or superheated steam cycles at similar temperatures . The current applications of the supercritical CO2 Brayton cycle are intended for the electricity production only and the questions which are related to the building of CHP plants based on Supercritical CO2 technology were not considered yet.
CHP is the concurrent production of electricity or mechanical power and useful thermal energy (heating and/or cooling) from a single source of energy. CHP is a type of distributed generation, which, unlike central station generation, is located at located at or near the point of consumption. Instead of purchasing electricity from a local utility and then burning fuel in a furnace or boiler to produce thermal energy, consumers use CHP to improve efficiency and reduce greenhouse gas (GHG) emissions. For optimal efficiency, CHP systems typically are designed and sized to meet the users’ thermal base load demand. CHP is not a single technology but a suite of technologies that can use a variety of fuels to generate electricity or power at the point of use, allowing the heat that would normally be lost in the power generation process to be recovered to provide needed heating and/or cooling. This allows for much greater improvement in overall fuel efficiency, therefore resulting in lower costs and CO2 emissions. CHP’s potential for energy saving is vast.
It should be noted that CHP may not be widely recognized outside industrial, commercial, institutional, and utility circles, but it has quietly been providing highly efficient electricity and process heat to some of the most vital industries, largest employers, urban centers, and campuses. While the traditional method of separately producing useful heat and power has a typical combined efficiency of 45 %, CHP systems can operate at efficiency levels as high as 80 % (Figure 1) .
Taking into consideration the high efficiency of fuel energy utilization of CHP plants and the high potential of the supercritical CO2 technology, the latter should be also considered as the base of future CHP plants. The comparison with traditional Steam based CHP plants also should be performed.
The study of CHP plant concepts were performed with the use of the heat balance calculation tool AxCYCLE™ .