#### Introduction to Performing Torsional Rotor Dynamics Analysis

Hello and welcome to the last part of our series on Rotor Dynamics! In today’s blog we’ll be concluding with torsional analysis, and the steps needed to perform this type of analysis. If you haven’t had a look at the other entries in this series, you can find them here:

Series Preface

In an earlier blog, we covered the basic definitions of lateral and torsional analysis. Lateral analysis is concerned with the bending behavior of a rotor train. Torque is a measurement of force that causes an object to rotate on an axis such as when a component needs to be “torqued to spec” in a car’s engine, for example. Torsional analysis, meanwhile, looks at the twisting behavior of the rotor train.

In the context of rotor dynamics, torsional vibrations refer to the oscillatory torsional deformations encountered by the shafts in the rotor train.

If these torsional vibrations and excitations are left undamped and aren’t analyzed properly, breakages and catastrophic failures can occur similar to undamped lateral excitations. For more on that, you can read up on the importance of rotor dynamics analysis here.

#### A Brief History of the Turbocharger – Part 1

Turbochargers are one of the more common turbomachines out there today! As everyone is making efforts to lower carbon dioxide emissions in automobiles, and the automotive OEMs engage in a “horsepower war”, the turbocharger will likely continue to grow in popularity for both civil and commercial uses.

But how did these machines get so popular? That’s what we’ll be exploring in this blog miniseries! Today’s blog will introduce the concept of the turbocharger, and the beginnings of its development around the turn of the 20th century.

Turbocharging engines and the idea of forced induction on internal combustion engines are as old as the engines themselves. Their intertwined history can be traced back to the 1880’s, when Gottlieb Daimler was tinkering with the idea of forced induction on a “grandfather clock” engine. Daimler was supposedly the first to apply the principles of supercharging an engine in 1900, when he mounted a roots-style supercharger to a 4-stroke engine.

The birth of the turbocharger, however, would come 5 years later, when Swiss engineer Alfred Büchi received a patent for an axial compressor driven by an axial turbine on a common shaft with the piston of the engine. Although this design wasn’t feasible at the time due to a lack of viable materials, the idea was there.

##### Turbochargers vs Superchargers

What idea was that, exactly? And how did it differ from supercharging?

I think it’s important to quickly go over the basic differences between turbocharging and supercharging. Both offer “forced induction” for piston engines. A naturally aspirated engine simply will draw in atmospheric air as the intake valve opens, and the piston travels down to bottom dead center. A forced induction engine, pushes more air into the cylinder than what the dropping of the piston would pull in, allowing more air to be combusted, and thus generating more power and efficiency. While turbochargers and superchargers are both forced induction , how superchargers and turbochargers go about compressing that air is different. Superchargers are driven by the engine themselves, typically via a belt or gear. This uses some of the engine’s available horsepower, but doing so provides more horsepower back to the engine. The compressors can be either positive displacement configurations (such as a Roots or Twin-Screw), or a  centrifugal supercharger.

Turbochargers, as mentioned before, use the air from the exhaust of the engine to drive a turbine, and the work of the turbine is transmitted on a common shaft to a compressor. The most common configuration is a radial turbine driving a centrifugal compressor similar to the one above in the supercharger diagram. However, there are other configurations ,seen in larger examples, such as an axial turbine driving a centrifugal compressor. Read More

#### Introduction to Performing Lateral Rotor Dynamics Analysis

Hello and welcome to the Lateral Analysis section of our Rotor Dynamics Blog Series! If you haven’t had a look at the other entries in this series, you can find them here: Series Preface

We’ve finally made it to the analysis part of the rotor dynamics and bearing analysis intro series! Let’s get into it, this blog will have a lot to cover!

#### Aircraft Fuel Systems

The airplane is a complex technical object. Like a human or other organisms, it consists of numerous vital systems; with one of the more critical ones being the fuel system. It is important part of any vehicle, let alone aircraft, aside from  the newest electric powered vehicles.

An aircraft’s fuel system provides fuel that is loaded, stored, managed and transported to the propulsion system of the vehicle[1, 2]. As aviation fuel is liquid, this system can be considered as hydraulic. Therefore, it’s able to be mapped out and modeled for analysis in a program like AxSTREAM NET™.

The Typical Fuel System of a Narrow-body Passenger Plane

For an example of a conventional aviation fuel system, consider a typical narrow-body airliner with two engines. Some of the popular planes in this category include the Boeing 737, the Tupolev Tu-204, Airbus A320, Comac C919, Sukhoi Superjet 100, Bombardier CRJ, Embraer E-Jet and Mitsubishi Regional Jet[3].

The storage fuel system is shown in figure 1 is for the Boeing 737-300. The fuel is kept in an integral tank that is divided to five separate subdivisions. They are the central, wing (main) and surge tanks[4].

The hydraulic scheme of the Boeing 737’s fuel system is shown in Figure 2. For fueling and defueling the storage system there are ports on the starboard wing. The system does not have pumps to onboard fuel, so fuel is pumped into the plane via a fuel truck. The other critical part of the fuel system is the line which delivers fuel to the two engines and the auxiliary power unit. In this line there are two boost centrifugal pumps by each engine.

#### A Century of Chiller Technology

A convergence of technologies had to occur to make the modern, high-efficiency centrifugal chiller a reality. To appreciate the technology fully, we must go back in history and understand the origins of the air conditioning and refrigeration industry. Along the way, we will find an important diversion in aerospace and the critically important centrifugal compressor. Ultimately, we will find that the modern chiller is a testament to advanced technology that was developed in multiple fields.

Some of the first advances in and applications of modern industrial refrigeration were in the United States. In May 1922, Willis Carrier revealed the “Centrifugal Refrigeration Machine” – a very early incarnation of what we now call a chiller [1]. The first installation went to a Philadelphia candy manufacturer; it’s interesting to know that the birth of modern refrigeration and air conditioning started on a large scale. Back in those days, economy of scale enabled the technology to be developed. It was not until a decade later that the core technology began to be adopted into compact units that could be used in smaller businesses such as boutique shops. It took several more decades for smaller residential air conditioners to take off commercially.

Shown in the photograph below is Carrier’s first centrifugal chiller in his New Jersey factory [1].

The size of this machine is evident, as is the fact that its design, at the time, necessitated components be spread out in space for assembly and maintenance. By modern standards, the same footprint space could be used to accommodate a modern chiller with over 500 refrigeration tons in capacity. By comparison the original design has less than 100 refrigeration tons of capacity.

#### It’s Rocket Science – and it’s Dangerous!

Rockets have always fascinated us and to this day a rocket launch is still a global news event worth watching. The sheer noise, power and sight after you hear that “…3-2-1, Lift off!” leave us in awe. A masterpiece of engineering, the recent historic manned SpaceX Falcon 9 launch was no exception. Or was it?

##### The beginnings

From the outside, a rocket does not look especially advanced – a mere ‘stick’ with a big flame shooting out at one end. The principal concept is simple, too, but the inner workings of a modern liquid-fuel rocket are highly complex.

The first rockets are believed to have existed in China, around 1200. The invention of gunpowder was crucial to the development of these primitive rockets, which were fireworks initially and then weapons. Multistage so-called ‘fire arrows’ were documented during the early Ming Dynasty (Figure 1). The designs were based on bamboo sticks – still a little way off a Falcon 9.

With the rise of gunpowder, this crude rocket technology spread throughout the Middle East and Europe.

The next rocketry milestone came in the 1780s, when the Indian military developed Mysorean rockets with iron castings and successfully deployed them against the British East India Company. Read More

#### Micro Gas Turbines in Trains and Railroad Technology

Welcome to this latest (and sadly, last) entry in the Micro Gas Turbines in Transportation series! Today, we’ll be having a quick look at micro gas turbines and their larger siblings, specifically the history of how they have been used in railroad locomotion and  what the future holds for micro turbines and railroad technology. We’ll also consider the advantages and disadvantages of using them to drive trains.

Rail transportation has been around in one form or another for longer than you might think. There are examples of wheeled carts running on fixed roads and tracks that prevented any deviation being used since the 6th century BC in ancient Greece.

Up until the late 18th Century, however, railroads were rather limited in what they could be used for, since there was no way of mechanically propelling the vehicles used. Rather, these railroads relied on humans, animals, or gravity to move the carts along the tracks. This changed when in 1784, the great Scottish inventor James Watt created and patented the first steam engine locomotive which was an improvement of a steam engine designed by Thomas Newcomen. Following this invention, engineers in the UK working on different projects such as Richard Trevithick and his development of the first high-pressure steam engine would lead to the first uses of locomotive-hauled railway. His invention would be used in Wales on a short 9 mile run from an iron-works in Penydarren to the Merthyr-Cardiff canal.(2)  On February 21st, 1804, the first trip took place on this railway using only steam propulsion.(2) However it wasn’t until George Stephenson’s creation paved the way for public use of steam engines like those created by James Watt on the rails, and in the coming years rail travel would play an important role not just in the United Kingdom but in the United States as well. This raises the question, where and when did turbines and turbomachinery come into play in rail travel?

Believe it or not, gas turbines in trains were being experimented with long before Frank Whittle and Hans von Ohain were designing them to take to the skies. As far back as 1861, the year that Abraham Lincoln became president of the United States, patents were being filed for a turbine that utilized ambient air mixed with combustion gasses to drive a turbine. As seen in patent 1633, Marc Antoine Francois Mennons created an engine that included all of the components needed in a modern gas turbine engine. It was called a “caloric engine” and it had a compressor (called a ventilator), combustion chamber (using ambient air and burned wood or coke), and a turbine to create work from the combustion gasses as well as a pre-heater (which he called a regenerating apparatus).(3)

#### Modeling a Ground Source Heat Pump

Ground source heat pumps (GSHP) are one of the fastest growing applications of renewable energy in the world, with annual increase of 10% in about 30 countries over the past 15 years.  Its main advantage is that it uses normal ground or ground water temperatures to provide heating, cooling and domestic hot water for residential and commercial buildings. GSHP’s are proving to be one of the most reliable and cost-effective heating/cooling systems that are currently available on the market and have the potential of becoming the heating system of choice to many future consumers, because of its capacity for providing a variety of services such as heat generation, hot water, humidity control, and air cooling. Additionally,  they have the potential to reduce primary energy consumption, and subsequently provide lower carbon emissions, as well as operate more quietly and have a longer life span than traditional HVAC systems. The costs associated with GSHP systems are gradually decreasing every year due to successive technological improvements, which makes them more appealing to new consumers.

The basic purpose of a GSHP is to transfer heat from the ground (or a body of water) to the inside of a building. The heat pump’s process can be reversed, in which case it will extract heat from the building and release it into the ground. Thus, the ground is the main heat source and sink. During winter, the ground will provide the heat whereas in the summer it will absorb the heat.

A GSHP comes in two basic configurations: ground-coupled (closed-loop) and groundwater (open loop) systems, which are installed horizontally and vertically, or in wells and lakes. The type chosen depends upon various factors such as the soil and rock type at the installation, the heating and cooling load required, the land available as well as the availability of a water well, or the feasibility of creating one. Figure 1 shows the diagrams of these systems.

In the ground-coupled system (Figure 1a), a closed loop of pipe, placed either horizontally (1 to 2 m deep) or vertically (50 to 100 m deep), is placed in the ground and a water-antifreeze solution is circulated through the plastic pipes to either collect heat from the ground in the winter or reject heat to the ground in the summer. The open loop system (Figure 1b), runs groundwater or lake water directly in the heat exchanger and then discharges it into another well, stream, lake, or on the ground depending upon local laws. Between the two, ground-coupled (closed loop) GSHP’s are more popular because they are very adaptable.

#### Charles Parsons and His Contribution to Engineering

Welcome to this special edition of the SoftInWay blog! While we at SoftInWay are known for helpful articles about designing various machines, retrofitting, and rotordynamics, we believe it is also important to examine the lives of some of the men and women behind these great machines.

The compound steam turbine is one of the greatest inventions, not just in turbomachinery but around the world. Once it was introduced to the marine industry, the steam turbine exploded in popularity as a means of allowing ships to travel faster and farther than ever before. It would go on to become a critical part in the naval arms race that preceded the First World War. The steam turbine not only revolutionized marine and naval propulsion, it became one of the best ways to generate electricity. After its inception, the steam turbine became one of the best ways to reliably generate power on a large scale, and make electricity the regular utility that it is today. But who invented the modern steam turbine?

Sir Charles Algernon Parsons, (1854 – 1931), is the inventor of the modern steam turbine. The work he undertook in his life had a massive impact on the world, continuing the legacy of James Watt by bringing steam technology into the modern era. Born on June 13th 1854 into an Anglo-Irish family, Sir Charles Parsons was born into a well-respected family with roots in County Offaly, Ireland. In fact the town now known as Birr was then known as Parsonstown, from the early 1600’s through to 1899. Parsons was the sixth son of the 3rd Earl of Rosse, and had a family lineage that had made great strides in the areas of military, political, and physical science. The family’s castle in Birr, which is still owned by the Parsons family and is the permanent residence of the 7th Earl of Rosse, was a rendezvous for men of science during the childhood of Sir Charles. Suffice it to say, there was no better place for a future-engineer to grow up. He alongside his brothers would receive private tutorship from Sir Robert Ball and Dr Johnstone Stoney, famous Irish astronomer and physicist, respectively. Read More

#### Engineering Luke Skywalker’s X-34 Landspeeder

Today, landspeeders we look at!

##### Introduction

Landspeeders belong to the “repulsorlift” transport class, like the podracers we looked at last year, and travel above a world’s surface (up to 2 meters) without contact (very useful on swampy lands like Dagobah). Landspeeders are the successors to the hanno speeder which was mainly used as a racing vehicle with many Tatooine natives still using them to race in the Boona Eve Classic today.

Landspeeders are found in both civilian and military applications but due to intergalactic ITAR regulations we will only cover the civil aspect here with a focus on the most famous of them all. If you want to know more about our experience working with military, defense and governmental organizations (whether you area part of the Empire, Rebels, Resistance or Separatists) feel free to contact us.

##### The Famous X-34

Luke Skywalker’s X-34, with its 6 selectable hover heights, features an engine consisting of 3 air-cooled thrust gas turbines able to reach a top speed of about 155 mph. The side engines are also used for steering although it is not obvious whether this steering is achieved by varying their thrust to be asymmetric or through vectoring of their exhaust. With the X-34 total length being 3.4 meters it helps us estimate the overall dimensions of its engines which are, each, roughly 80 cm long by 30 cm wide. Read More